Heathkit Virtual Museum List Archive

 
 
Home History HI-FI & Stereo Ham Radio Test Equipment Computers Other Tech Resources Related Sites Special Features Listserv
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[heathkit] Parts




----- Original Message -----
From: Bry Carling <bcarling@cfl.rr.com>
Date: Saturday, May 16, 2009 11:55 pm
Subject: [heathkit] Parts

> FOR SALE - PARTS etc.
> 
Bry,

I have a problem.

While on 20 meters I switched CW/Standy switch on my DX 60 to CW.

When I keyed down, a billow of smoke came out of my HR-10 RX. 35 Watts into an RX looking for maybe 100 to 1000 mv. Quite the link budget. My Dow-Key relay jammed.

Here is my list for starters.> Group of three panel meters
> 
> 0-200 mA DC meter -  3-1/2" diameter. GE
> 0-100 mA DC meter -  2-1/2" square. Burlington
> 0-10mA / 40 mA / 200 mA DC meter -  2-1/2" square. EF Johnson (Rear 
> lighted)
> Will sell the group of three for $12.00 plus shipping
> 
> = = =
> Pittman gear motor 24V DC with 60:1 ratio gears and 1/4" X 3/4" 
> long shaft 
> for output.  Body dimensions -  3-1/2" long by 1-1/2" diameter.
> Mount with three screws on froint face or with four screws in rear 
> face.
> Available for $5.00 plus shipping
> 
> = = =
> VARIABLE CAPACITOR:
> 3-Gang variable cap - Brand New 650 pF per section. Ideal for 
> linear amplifier 
> service.
> 1950 pF total capacitance. Stout construction - nickel plated 
> frame, new old stock. 
> Dimensions: 3.25" X 2.75"  X  4.75" deep.
> It has a short 1/4" shaft about 3/8" long, so use with coupling or 
> similar.Available for $14.00 plus shipping
> 
> = = =
> VARIABLE CAPACITOR:
> Cardwell Dual gang variable capacitor ... Two sections each 1000 pF.
> 2000 pF total capacitance.  It looks like it would handle a really 
> powerful RF linear 
> amplifier 
> application with several KW.   It appears to be new old stock, 
> although you can see 
> that 
> a knob has been attached for testing.  Hard to tell whether it has 
> ever been used. 
> No soldering has occurred. Dimensions 13"  X  4.5"  X  3.5" and has 
> a 1/4" shaft
> QTY 1 available for $36.00
> 
> = = =
> VARIABLE CAPACITOR:
> NATIONAL: RADIO CO. Dual gang variable capacitor ... Two sections 
> each 35 
> pF.
> 70 pF total capacitance. Very wide spaced.  This one will be good 
> for several KV. 
> Dimensions: 6.75"  X  2.75"  X  2.5"
> Has 0.25" X  1.5" shaft.
> 
> QTY 1 available for $8.00 plus shipping
> 
> = = =
> MCD 35-2 Dual gang variable capacitor ... Two sections each 35 pF.
> 70 pF total capacitance.
> Heavy ceramic construction, nickel plated rock solid. Spacing
> looks like it could easily handle 1200 - 1500 V.
> Dimensions: 4"  X  2.5"  X  1.75"
> Has 0.25" X  0.75" shaft.
> QTY 1 available for $5.00 plus shipping
> > Group of three panel meters
> 
> 0-200 mA DC meter -  3-1/2" diameter. GE
> 0-100 mA DC meter -  2-1/2" square. Burlington
> 0-10mA / 40 mA / 200 mA DC meter -  2-1/2" square. EF Johnson (Rear 
> lighted)
> Will sell the group of three for $12.00 plus shipping
> 
> = = =
> Pittman gear motor 24V DC with 60:1 ratio gears and 1/4" X 3/4" 
> long shaft 
> for output.  Body dimensions -  3-1/2" long by 1-1/2" diameter.
> Mount with three screws on froint face or with four screws in rear 
> face.
> Available for $5.00 plus shipping
> 
> = = =
> VARIABLE CAPACITOR:
> 3-Gang variable cap - Brand New 650 pF per section. Ideal for 
> linear amplifier 
> service.
> 1950 pF total capacitance. Stout construction - nickel plated 
> frame, new old stock. 
> Dimensions: 3.25" X 2.75"  X  4.75" deep.
> It has a short 1/4" shaft about 3/8" long, so use with coupling or 
> similar.Available for $14.00 plus shipping
> 
> = = =
> VARIABLE CAPACITOR:
> Cardwell Dual gang variable capacitor ... Two sections each 1000 pF.
> 2000 pF total capacitance.  It looks like it would handle a really 
> powerful RF linear 
> amplifier 
> application with several KW.   It appears to be new old stock, 
> although you can see 
> that 
> a knob has been attached for testing.  Hard to tell whether it has 
> ever been used. 
> No soldering has occurred. Dimensions 13"  X  4.5"  X  3.5" and has 
> a 1/4" shaft
> QTY 1 available for $36.00
> 
> = = =
> VARIABLE CAPACITOR:
> NATIONAL: RADIO CO. Dual gang variable capacitor ... Two sections 
> each 35 
> pF.
> 70 pF total capacitance. Very wide spaced.  This one will be good 
> for several KV. 
> Dimensions: 6.75"  X  2.75"  X  2.5"
> Has 0.25" X  1.5" shaft.
> 
> QTY 1 available for $8.00 plus shipping
> 
> = = =
> MCD 35-2 Dual gang variable capacitor ... Two sections each 35 pF.
> 70 pF total capacitance.
> Heavy ceramic construction, nickel plated rock solid. Spacing
> looks like it could easily handle 1200 - 1500 V.
> Dimensions: 4"  X  2.5"  X  1.75"
> Has 0.25" X  0.75" shaft.
> QTY 1 available for $5.00 plus shipping
> 
> Thanks for looking & 73 de AF4K, Bry
> 
> 
> 
> Thanks for looking & 73 de AF4K, Bry
> 
> 
> 

For an HR-10

20-15-10 meter input coils.

I don't know how much damage there was after the front end.

I also need a relay to do the switching job. Perhaps a Potter and Brumsfeld?

73,

Alan

BTW,

I also need 14/7 antenna wire.


Tech Resources | Related Sites | Special Features | Listserv

Home | History | Hi-Fi & Stereo | Ham Radio | Test Equipment | Computers | Other