[heathkit] AA-151 Amp

["David Decker" <ddecker@hotwater.com>]

I need to figure out the proper way to hook the speakers to the AA-151 before I power it up.  The last time this unit was plugged in was the mid 1980's and it worked great then.

 

I have a set of Alesis monitor one speakers that are 4 ohm impedance.  They have two connections each +/-.

 

      * = flathead screw terminal

 

The right channel has flathead screw terminals that states:

                                                  SPKR

4 ohm      8 ohm      16 ohm        C        S

    *             *               *              *         *

 

There is a "Impedance Selector" wire already hooked to the 8 ohm terminal on the right channel. 

 

 

The left channel has flathead screw terminals that states:

 

C     4 ohm      8 ohm     16 ohm

*         *              *              *

 

The SPKR PHASE switch is switched to the left "NORM".  If switched to right it states "REV".

 

This is my first experience hooking these speakers up to this unit.  Im used to the plain + and - on newer solid state units.

 

Any help would be appreciated.

 

 

Thanks!

David A. Decker
Sales and Order Entry
1-800-937-1037
1-800-581-7224-fax
e-mail at david.decker@awhc.com