[heathkit] Kit 341-A Docs

[barry tuttleman <btuttleman@worldnet.att.net>]

while going thru some manuals, i found a one page sheet that was
sitting folded in my GD-1B Grid Dip Meter Assembly Manual; this
manual is p/n 595-67, 1956 datecode.  The p/n on the 341-A sheet
is p/n 595-76 (no date).
This documentation pertains to: "Use of the Extended Range Coils,
Kit 341-A"; the kit consists of two tapped coils (p/n 40-51B 1 Pie
Wound Coil, & p/n 40-51A, 2 Pie Wound Coil), which extend the range
of the GD-1B down to 350kc; normally, coil p/n 40-46A is the lowest
range, usable 2 - 5 mhz unless the extended range kit is ordered.
this kit is mentioned in the specs page of the GD-1B manual, and is
also mentioned at the bottom of the logging scale chart located in
the "operating" section of the GD-1B manual (this chart is to be used
w/ the 341-A Kit).
i have scanned the one page that the Extended Range Kit comes with,
along w/ the logging chart; the logging chart is available in the
BAMA download of the GD-1B, but the scan is of low resolution, and
a little "iffy" in the readability factor, so i've scanned the chart
as a .jpg @ 300dpi for clarity.
anyone wishing to have these two scans emailed to them please simply
contact me; be advised the scans are just under 1 mb (due to the graph
scan), please make sure your INBOX can handle this.
tnx,
barry
carson city, nv
PS: i will probably upload these to BAMA sometime next week.

--
Barry Tuttleman
Carson City, Nevada

electronics-related website:
http://home.att.net/~btuttleman2/electron.html

industrial-related website:
http://home.att.net/~btuttleman/barrysite.html